Key Features
Frequency Range: 400-470 MHz
128 Channels/128 Zones
25 Watts RF Output
Emergency Mode
QT & DQT Signalling plus DTMF PTT ID
5-Tone Encode/Decode
Electronic Serial Number
MDC-1200 Signalling (requires special license ID)
D-Sub 15 pin Interface Connector
Requires Optional Microphone
Supplied With
D.C. Cable Yes
Fuse Yes, 10 A
Instruction Manual Yes, English, Spanish, German, French, Dutch, Italian, Turkish & Greek
Mounting Bracket Yes
Screw Set Yes
PMR General Features
Blue colour LED Yes
3-colour LED (Red, Orange, Green) Yes
5-Tone Signalling formats (requires special license ID)
Busy Channel Lock-out Yes
Calling Alert Yes
Compact Design Yes
Companded Audio Yes
DB-15 Accessory Connector Yes; can also be programmed as 8 individual Accessory Ports
DTMF Function Yes
Ease of Operating Use Yes
Easy Option Port (26-pin) Yes
Embedded Message Yes
Emergency Call Function Yes
Emergency Key Yes
Enhanced Kenwood Audio Yes
FleetSync Yes
Front-mounted Loudspeaker Yes
GPS Compatible Yes
Horn Alert/PA Function Yes
Independent Setting per Channel Compander, Scrambler, Wide/Narrow Deviation & Hi/Lo Power
Kenwood ESN (Electronic Serial Number) Yes
Key Lock Yes
Lone Worker Function Yes
MDC-1200 Yes
Minimum-Volume Setting Yes
Monitor Button Yes
MPT Trunking (option) Firmware Upgrade
Multiple Scanning Function Yes
Operator Selectable Tone Yes
Programmable Function Keys 10 Programmable Function Keys
PTT ID Yes
QT (CTCSS) / DQT (digital) Yes
Remote Stun and Revive Yes
RSSI Level Indicator Yes
SelCall Function Yes
Selectable Microphone Gain Yes
Switchable Display Backlighting Yes
Talk Around Yes
"Talk Back" Scanning Function Yes
Time-Out Timer Yes
Transceiver Password Yes
Voice Inversion Scrambler Yes
Voting Function Yes
Windows PC Programming and Tuning Yes
Wired Cloning Function Yes
FleetSync Signalling Features
External-device Switching Yes, External devices can be switched (via the AUX output) on receipt of a status ID code
Paging Call Function Yes
PTT ID Digital ANI Yes
Selective Calling Yes
Short/Long Text Messages Yes
Status Messaging Yes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory.
MDC1200 Signalling Features
Emergency Encode/Decode Yes
PTT ID Encode/Decode Yes
Radio check Decode Yes
Stun/Revive Decode Yes
Options
Internal GPS Board Yes - NMEA 0183 V2 compatible
"Molex" interface Via KCT-60M Cable
Voice Guide & Storage Yes
Applicable Standards
R&TTE: EN300 086, 300 113, 300 219, 301 489 Yes
EU Safety: EN60065, 60950-1, 60215 Yes
Factory Quality Certification and Location ISO 9001. Manufactured in Singapore
For use in the EU Yes
IP54 Yes
MIL-STD 810 C/D/E/F/G Yes
Technical Specifications
Frequency Range - E Type 400-470 MHz
Number of Channels 128
Number of Zones 128
Channel Frequency Spread 70 MHz
Channel Spacing - Analogue - Wide/Mid/Narrow 25 kHz/20 kHz/12.5 kHz
Antenna Impedance - 50 Ohm Yes
Current Drain Standby: 0.3 A
Receive: 1.0 A
Transmit: 8.0 A
Frequency Stability ± 2.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range -30 °C to + 60 °C
Operating Voltage 13.2 V DC ± 15%
PLL Channel Steps 5.0 kHz/6.25 kHz
Dimensions 160 x 43 x 136 mm (Projections not included)
Weight (net) 1.2 Kg
Receiver Specifications
Adjacent Channel Selectivity Wide/Mid/Narrow - 70/70/60 dB
Audio Output 4 W with less than 5% distortion
Intermodulation 67 dB
Sensitivity - EIA 12 dB SINAD 0.28 µV at 25 kHz
0.28 µV at 20 kHz
0.35 µV at 12.5 kHz
Spurious & Image Rejection 70 dB
Transmitter Specifications
RF Power Output (High/Low) 25 W / 5 W
FM Noise (EIA) Wide/Mid/Narrow: 45/45/40 dB
Microphone Impedance 600 Ohm
Modulation Distortion (Wide/Mid/Narrow) Less than 3%
Modulation Limiting ± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN) -36 dBm ≤ 1 GHz
-30 dBm > 1 GHz