KENWOOD NX-220E3 (VHF)

Key Features

NXDN Digital Air Interface
AMBE+2 Vocoder for Natural Sounding Digital Voice
Operates in NXDN Digital Conventional and FM Analogue modes, even on the same channel. Autosenses Received Mode (Digital or Analogue)
Digital Conventional and Digital Trunking Modes
Multi-Site Digital Trunking, up to 60000 GIDs and 60000 UIDs per Network
Multi-Site IP Network Compatible
True 6.25 kHz channel spacing operation
Includes Radio-To-Radio Mode (no repeater needed)
IP54/55 and MIL-STD 810C/D/E/F/G Certification
Supplied With

Belt Clip    Yes, KBH-12
Instruction Manual    Yes, English, Spanish, French, Italian, German, Dutch, Turkish & Greek
PMR General Features

5-Tone Signalling formats    Yes
Battery Saver Mode    Yes
Battery Status Indicator    Yes
Busy Channel Lock-out    Yes
Calling Alert    Yes
Compact Design    Yes
Companded Audio    Yes
Digital ANI Built-in    Yes
DTMF Function    Yes
Dual-mode Scanning    Yes
Ease of Operating Use    Yes
Emergency Call Function    Yes
Emergency Key    Yes
Emergency Advanced Motion Detection Function    Man-Down function as standard. And an optional Software Licence gives Dual-mode "Staff Safe" alerts triggered either by a pre-set time with no movement or a pre-set time of excessive movement
Flash Upgradeable Firmware    Yes
FleetSync/FleetSync II    Yes
Internal VOX Ready    Yes
Lone Worker Function    Yes
Low Battery Warning    Yes
MDC-1200    Yes
Motion Detection Function    Yes, Both the trigger angle and the trigger time can be pre-set
Multiple Scanning Function    Yes
Programmable Function Keys    3 Programmable Function Keys
Programmable TX/RX Indication    Yes, Switchable ON or OFF
PTT ID    Yes
QT (CTCSS) / DQT (digital)    Yes
Single-Tone Encode, 2-Tone Encode/Decode    Yes, Requires FCC K-version firmware. May affect other functions - see your dealer for details
Talk Around    Yes
"Talk Back" Scanning Function    Yes
Time-Out Timer    Yes
Transparent Data Mode    Yes
Voice Inversion Scrambler    Yes
Voting Function    Yes
Windows PC Programming and Tuning    Yes
NEXEDGE Features

Auto-Roaming/Registration (Multi-Site Trunking Mode)    Yes
Broadcast Call (Trunking Mode)    Yes
Call Queuing with Priority    Yes
Fail Soft Mode    Yes
FleetSync/FleetSync II Including PTT ID Digital ANI (Analogue Mode)    In Conventional FM Mode
FM Analogue Conventional Included    Yes
GIDs Per Network (Multi-Site Trunking Mode)    60000
GPS Location with Voice    Yes
Late Entry (Trunking Mode)    Yes
Message Trunked Mode    Yes
Multi-Site IP Network Compatible    Yes
NXDN Conventional Included    Yes
NXDN Digital 12.5/6.25kHz Channel Spacing    Yes
Over-the-air Alias    Yes
Over-the-air Programming    Yes, Allows NEXEDGE radios to be re-programmed remotely
Priority Monitor IDs    Yes, 4 IDs
Radio Access Numbers (RAN)    Yes, 64 (Including "None") in Digital Conventional Mode
Remote Group Add (Trunking Mode)    Yes
Remote Stun/Kill    Yes
Selcall - Individual and Group (Digital Mode)    Yes
Site Roaming (Digital Conventional Mode)    Yes
Special Alert Tone Patterns    Yes
Telephone Interconnect Function    Yes, Requires KTI-4 Interconnect and a Telco unit
Transmission Trunked Mode    Yes
UIDs Per Network (Multi-Site Trunking Mode)    60000
Wide Area All Group Call (Multi-Site Trunking Mode)    Yes
FleetSync Signalling Features

Emergency Status    Yes
GPS Ack Request    Yes
Group Calling    Yes
Power On/Off Status Messages    Yes
PTT ID & Emergency GPS Reporting    Yes
PTT ID Digital ANI    Yes
Selective Calling    Yes
Status Message Block GPS Reporting    Yes
Status Messaging    Yes
MDC1200 Signalling Features

Emergency Encode/Decode    Yes
PTT ID Encode/Decode    Yes
Radio check Decode    Yes
Stun/Revive Decode    Yes
Options

Choice of Optional Battery Packs    Yes
GPS Speaker/Mic Option    KMC-48GPS
MIL-SPEC speaker mic. with programmable controls    Yes
Applicable Standards

R&TTE: EN300 086, 300 113, 300 219, 301 489, 301 166    Yes
R&TTE: EN301 166    Voice & Data for 6.25KHz Digital
EU Safety: EN60065, 60950-1, 60215    Yes
For use in the EU    Yes
IP54    Yes
IP55    Yes
Measurement - EIA Standards    Yes
Measurement - EN Standards    Yes
MIL-STD 810 C/D/E/F/G    Yes
Technical Specifications

Frequency Range    136 - 174 MHz
Number of Channels    64
Number of Zones    4
Channel Frequency Spread    38 MHz
Channel Spacing - Analogue - Wide/Mid/Narrow    25 kHz/20 kHz/12.5 kHz
Channel Spacing - Digital - Wide/Narrow    12.5 kHz/6.25 kHz
Antenna Impedance - 50 Ohm    Yes
Battery Life    5-5-90 
with KNB-57L: approx 11.5 hours
with KNB-56N: approx 8.5 hours
with KNB-55L: approx 8.5 hours
Frequency Stability    ± 2 ppm (-30 °C to + 60 °C)
Operating Temperature Range    -30 °C to + 60 °C
Operating Voltage    7.5 V DC ± 20%
Dimensions    With KNB-57L:
56 x 110.5 x 40.1 mm
With KNB-56N:
56 x 110.5 x 43.8 mm
With KNB-55L:
56 x 110.5 x 38.1 mm

- Projections not included -
Weight (net)    With KNB-57L: 325 g
With KNB-56N: 400 g
With KNB-55L: 300 g
Receiver Specifications

Adjacent Channel Selectivity (Analogue)    76 dB at 25 kHz
74 dB at 20 kHz
68 dB at 12.5 kHz
Audio Output    500 mW with less than 3% distortion. 8 Ohms Impedance
Intermodulation (Analogue)    65 dB
Sensitivity (Analogue) - EIA 12 dB SINAD    0.28 µV at 25 kHz
0.28 µV at 20 kHz
0.32 µV at 12.5 kHz
Sensitivity (Analogue) - EN 20 dB SINAD    -3 dB µV at 25 kHz
-3 dB µV at 20 kHz
-1 dB µV at 12.5 kHz
Sensitivity (Digital)    3% BER:
0.32 µV at 12.5 kHz
0.25 µV at 6.25 kHz
1% BER:
-1 dB µV at 12.5 kHz
-4 dB µV at 6.25 kHz
Spurious Reponse Rejection (Analogue)    75 dB
Transmitter Specifications

RF Power Output (High/Low)    5 W / 1 W
FM Noise (EIA)    Analogue:
45 dB at 25 kHz
45 dB at 20 kHz
40 dB at 12.5 kHz
Microphone Impedance    1800 Ohm
Modulation Distortion    Less than 3%
Modulation Limiting    Analogue:
± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN)    -36 dBm ≤ 1 GHz 
-30 dBm > 1 GHz

Yorum Yap

Adınız:


Yorumunuz: Not: HTML'ye dönüştürülmez!

Oylama: Kötü           İyi

Doğrulama kodunu giriniz: