Key Features
Frequency Range: 146-174 MHz
16 Full-Duplex Channels & Single Priority Scan
Variable RF Output - 25 W to 50 W
Windows Programming & Tuning Software
External Control I/O via D-Sub Connector
Battery Back-up System
Flash Memory For Firmware/System Upgrades
Durable Die-Cast Chassis Construction
Supplied With
Cushion Yes
D.C. Cable Yes, 4m long
Foot Yes, 4 pcs
Front Glass Yes
Fuse Yes, 15A
Handle Yes
Hardware Fixture Yes
Instruction Manual Yes, English, Spanish, French, Italian, German & Dutch
Screw Set Yes
PMR General Features
5-Tone Signalling (multi-format) Yes
Character Display (Numeric) 2 Characters
Compact Design Yes
Companded Audio Yes
DB-25 Accessory Connector Yes
DTMF Function Yes
Ease of Operating Use Yes
Embedded Message Yes
Kenwood ESN (Electronic Serial Number) Yes
Programmable Function Keys 6 Programmable Function Keys
PTT ID Yes
QT (CTCSS) / DQT (digital) Yes
RSSI Level Indicator Yes
Scan Yes
SelCall Function Yes
Time-Out Timer Yes
Transceiver Password Yes
Windows PC Programming and Tuning Yes
Base Station & Repeater Features
5-Tone Selective Call Yes
5-Tone/DTMF Over-The-Air Remote Control and Reporting Yes
19" Rack Mount Design Yes
Backup Power Features with Warnings Yes
"Base Station" or "Repeater" Mode Operation Yes
Base Station Features Yes
Conventional or Trunked System Use Yes
"Community Repeater" Ready Yes
CW ID Yes
Flash ROM for Future Upgrades Yes
Front Mounted Speaker Yes
Full-Duplex Operation Yes
LED Display & Indicators Yes
Programmable Features - 6 PF keys, 2 x LEDs, volume knob, speaker and tones Yes
Repeater Features Yes
Repeater Open/Close Yes
Sel-Call and Status Call Yes
Time-Out Timer Yes
Windows Programming and Tuning Software Yes
PMR Construction Features
Front Mounted Speaker Yes
Accessory Features
Current drain Standby (Power Save): 0.3 A
Receive: 1.2 A
Transmit/Receive: ≤ 13 A
Applicable Standards
R&TTE: EN300 086-2 Yes
EN300 113-2 Yes
EN300 219-2 Yes
EN301 489-5 Yes
EU Safety: EN60065 Yes
EU Safety: EN60215 Yes
EU Safety: EN60950 Yes
Measurement - EN Standards Yes
Technical Specifications
Frequency Range - E Type 146-174 MHz
Number of Channels 16
Channel Spacing Wide: 25 kHz
Narrow: 12.5 kHz
5-Tone Standard EEA, ZVEI, CCIR, ZVEI-2, EIA, Kenwood proprietary
Antenna Impedance - 50 Ohm Yes
Antenna Connector RX: BNC TX: N
CW ID Variable speed/tone frequency/modulation
CW Message 8 x 32 characters max.
Duty Cycle 100% at 25 W
Frequency Stability ± 2 ppm (-30 °C to + 60 °C)
Operating Modes FM
Operating Temperature Range -30 °C to + 60 °C
Operating Voltage 13.2 V DC ± 15% Negative Ground
PLL Channel Steps 2.5 kHz/5.0 kHz/6.25 kHz
Repeater Hold Time From "Off" to 10 seconds
Test Tone Variable modulation/frequency
Dimensions 483 x 88 x 340 mm
Weight (net) 9.7 kg
Receiver Specifications
Adjacent Channel Selectivity 85 dB at 25 kHz
77 dB at 12.5 kHz
Audio Output 4 W with less than 5% distortion
Circuitry - Double Conversion Superheterodyne Yes
Intermodulation 72 dB
Sensitivity - EN 20 dB SINAD 0.45 µV
Spurious Reponse Rejection (Analogue) 90 dB
Transmitter Specifications
RF Power Output 25 W to 50 W (100% Duty Cycle at 25 W)
Microphone Impedance 600 Ohm
Modulation Distortion Less than 3%
Modulation Limiting ± 5 kHz at 25 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN) -36 dBm ≤ 1 GHz
-30 dBm > 1 GHz